Hammerite Red Oxide Primer

Hammerite-Ultimate metal protection.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • A high performance anticorrosive formulation
  • Quick drying.
  • Can be used inside or outside
  • Use on gates,railings and metal drainpipes
  • Solvent based
Technical Information
  • Finish Matt
  • Coverage 12m2per litre
  • Drying Time 2 hours
  • Recoatable 6 hours
  • Composition Solvent-based
Product Features
  • A high performance anticorrosive formulation
  • Quick drying

Product Description

Hammerite Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel.For aluminium, galvanised and all other non-ferrous metals, use Hammerite Special Metals Primer

Application Description

Stir paint thoroughly. For best results when applying by roller, use a short pile mohair roller. Apply 2 coats of Hammerite Red Oxide Primer, allowing a minimum of 6 hours between coats. A topcoat may be applied after a minimum of 6 hours. For best results, allow 24 hours. Hammerite Red Oxide Primer can be overpainted with most paints.

Technical & Safety Documentation

"Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.

System information

Stir paint thoroughly. For best results when applying by roller, use a short pile mohair roller. Apply 2 coats of Hammerite Red Oxide Primer, allowing a minimum of 6 hours between coats. A topcoat may be applied after a minimum of 6 hours. For best results, allow 24 hours. Hammerite Red Oxide Primer can be overpainted with most paints.

Tips & Advice

  • 1. Preparing the Surfaces
    All surfaces must be clean and dry. Remove loose rust, scale and paint with a wire brush then rub down with coarse abrasive paper to provide a firm surface. Abrade bare steel with coarse abrasive paper. Degrease all surfaces with Hammerite Brush Cleaner & Thinners and allow to dry
  • 2. Cleaning
    Remove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite Red Oxide Primer should be stored in a dry well ventilated area. Protect from frost, extremes of temperature and direct sunlight
Fetching the data, plz wait..