Good to see you
Otherwise login by email.
Welcome to Dulux Trade
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information.
Registration complete
Successfully registered, please login
Hammerite High Heat Paint
Hammerite:Ultimate metal protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Resists temperatures of up to 600°C
-
Resists cracking and flaking
-
No primer required
-
Quick drying.
-
Solvent based
-
Finish Matt
-
Coverage 400ml covers up to 1 square metre
-
Drying Time 30 minutes
-
Recoatable 15 minutes
-
Composition Solvent-based
-
Heat resistant
-
No primer required
Product Description
Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600°C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required
Application Description
Switch off all ignition sources. Ensure surface is cool before and during spraying. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use. Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes.To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. When touch dry (about 30 minutes) apply a further 2-3 coats, allowing 15 minutes between each coat. After application leave the painted surface to dry overnight. Turn aerosol upside down and spray for 2 seconds in between coats and after final use.
Technical & Safety Documentation
Flame, Exclamation mark Danger Contains Acetone. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F. Dispose of contents and container in accordance with all local, regional, national or international regulations. Repeated exposure may cause skin dryness or cracking.
System information
Switch off all ignition sources. Ensure surface is cool before and during spraying. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use. Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes. To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. When touch dry (about 30 minutes) apply a further 2-3 coats, allowing 5 minutes between each coat. After application leave the painted surface to dry overnight. Turn aerosol upside down and spray for 2 seconds in between coats and after final use.
Tips & Advice
-
1. Preparing the SurfacesEnsure surface is cool before and during preparation. Lightly abrade the surface to remove loose paint and rust. Remove dirt and grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow to dry
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
Hammerite High Heat Paint