Hammerite Direct To Rust Metal Paint Satin Finish

Hammerite-Ultimate metal protection.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Direct to rust. Easy to use.
  • Up to 8 years rust protection
  • Ultra tough - excellent weather resistance
  • Satin finish
  • Solvent based
Technical Information
  • Finish Satin
  • Coverage 5m2per litre
  • Drying Time 1-2 hours
  • Recoatable 4 hours
  • Composition Solvent-based
Product Features
  • Direct to rust
  • No need for primer or undercoat

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one

Application Description

Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously .Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.

Technical & Safety Documentation

"Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.

Colour Range

Hammerite Colours

System information

Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously. Brush application- Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. Coventional spray application- Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers.

Tips & Advice

  • 1. Preparing the Surfaces
    Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush
  • 2. Cleaning
    After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners. Do not use or store in extremes of temperature
Fetching the data, plz wait..