Hammerite Direct To Rust Metal Paint Hammered Finish

Hammerite:Ultimate metal protection.

Select a Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Direct to rust. Easy to use.
Up to 8 years rust protection
Ultra tough - excellent weather resistance
Subtle hammered effect with a metallic sheen
Solvent based

Technical Information

Finish Hammered finish
Coverage 5m2per litre
Drying Time 1-2 hours
Recoatable 4 hours

Product Features

Direct to rust
No need for primer or undercoat

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one

Application Description

Technical & Safety Documentation

"Flame, Exclamation mark Warning Contains Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromaticsFlammable liquid and vapour. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Keep cool.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking."

Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.

Download Adobe Reader

Colour Range

Hammerite Colours

System information

Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously. Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers.

Tips & Advice

1. Preparing the Surfaces

Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface.If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered.On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered
2. Cleaning

After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners. Do not use or store in extremes of temperature

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator