Products
Products
Hammerite Direct To Rust Metal Paint Aerosol Hammered Finish

Hammerite Direct To Rust Metal Paint Aerosol Hammered Finish

Hammerite-Ultimate metal protection.

Silver

Change Colour

Size

400ML

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Direct to rust. Easy to use.
Up to 8 years rust protection
Ultra tough - excellent weather resistance
Subtle hammered effect with a metallic sheen
Solvent based

Technical Information

Finish Hammered finish
Coverage Aerosol - 400ml covers up to 0.5m²
Drying Time 1-2 hours
Recoatable 15 minutes
Composition Solvent-based

Product Features

Direct to rust

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one

Application Description

Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes .Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages

Technical & Safety Documentation

"Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness. Pressurized container- may burst if heated.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED- Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.

Download Adobe Reader

Colour Range

Hammerite Colours

System information

Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages.

Tips & Advice

1. Preparing the Surfaces

Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust and grease with diluted detergent.Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry.Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for at least 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface. If there is a reaction remove all paint from the surface. On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator