Products
Products
Dulux Trade Quick Dry Satinwood

Dulux Trade Quick Dry Satinwood

An advanced water-based, satin finish

30BG 72/017

Change Colour

Size

1L 2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Excellent satin finish
Advanced water based technology
Tough, durable finish

Technical characteristics

Technical Information

Finish Satin
Coverage Up to 12m² per litre
Drying Time Dependent on temperature and humidity
Recoatable 4-6 hours
Thinning Water 10
Composition Water-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Quick Dry Satinwood is an advanced water-based, satin finish that provides a smooth, durable top coat for use on both interior wood and metal.

Application Description

Application: Apply by brush, roller or spray. For best results use a good quality synthetic (nylon polyester) brush, designed for use with water-based paints. STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Quick Dry Satinwood on previously coated or suitably primed surfaces. Where a strong colour change is involved, or when overcoating a factory primed substrate, we recommend that a coat of Dulux Trade Quick Dry Undercoat is applied.
Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 133 bars (2000 lb/sq in) with a spray tip size of 0.38mm (15 thou) and a spray tip angle of 65°.

Technical & Safety Documentation

Download Adobe Reader

Colour Range

True Joy™ - Colour of the Year 2025, Weathershield Masonry Palette, Colour Futures 2020, Armstead Colour Guide, Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

1. Preparing the Surfaces

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 551 for full information at duluxtrade.co.uk or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints. Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
2. Cleaning

After use, remove as much paint as possible from equipment before cleaning with water
3. Storing

Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator