Products
Products
Dulux Trade Plus Smooth & Protect +

Dulux Trade Plus Smooth & Protect +

Protective Mid-Coat (part 3 of 3 part Dulux Trade Plus ThermaCoat+ system); provides a smooth flat finish ready for painting

White

Only 1 Colour is Available

Size

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Part 3 of Dulux Trade Plus Thermacoat+ system:protective mid-coat

Technical Information

Finish Matt
Coverage 1m² per litre
Recoatable 12 hours
Composition Water-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Plus Smooth & Protect+ is part 3 of the 3 part Dulux trade Plus Thermacoat+ system. It has been specially designed to provide a protective mid-coat for the Dulux Trade Plus Thermacoat+ system, providing a smooth, flat finish that can be painted with any suitable interior Dulux Trade emulsion.

Application Description

We recommend reading the Dulux Trade Plus Smooth & Protect + Product Datasheet for full information available free on request by telephoning 0333 222 70 70 (ROI 021 422 0222) or visiting duluxtrade.co.uk. Dulux Trade Plus Smooth & Protect+ is ready to use. Do not dilute. Wear gloves, dust mask, arm and eye protection. For use over Dulux Trade Plus Thermacoat+ and Dulux Trade Plus levelling Fleece. Using a plastic spatula or flat trowel gently apply a 1mm layer on top of dry Dulux Trade Plus Thermacoat+ and Dulux Trade Plus Levelling Fleece. Distribute evenly until a smooth , flat finish is achieved. Leave to dry (minimum 12 hours depending on conditions). Before lightly sanding with very fine (240+ Grit) sandpaper and paint with any suitable interior Dulux Trade emulsion. Tip: for best results thin first coat 9up to 1 part clean water to 10 parts paint) Please note the Dulux trade Plus Thermacoat+ system can take up to 7 days to fully cure and gain full strength. This product should not be used in areas where condensation is a problem eg kitchens and bathrooms

Technical & Safety Documentation

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

We recommend reading the Dulux Trade Plus Smooth & Protect + Product Datasheet for full information available before use, available free on request by telephoning 0333 222 70 70 (ROI 021 422 0222) or visiting duluxtrade.co.uk. For interior use only. Do not thin. Preparation Summary:Ensure parts 1 & 2 of the Dulux Trade Plus Thermacoat + system have been applied as specified and are dry, ready for part 3 (Dulux Trade Plus Smooth & Protect +) to be applied.
2. Cleaning

After use scrape any re-usable product from tools back into the pack for reuse and then clean tools with water.
3. Storing

Do not use or store in extremes of temperature and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator