Dulux Trade Line Marking Paint

A hard-wearing, single pack, acrylated rubber line marking paint for interior and exterior use

Select a Colour

Size

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Excellent scuff resistance
High-build finish
Withstands repeated washing
Solvent-based

Technical Information

Finish Matt
Coverage Up to 10m² per litre
Drying Time 30 minutes
Recoatable 1 hour
Composition Solvent-based

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Line Marking Paint is for interior and exterior use, marking areas such as car parks and demarcation zones on concrete and asphalt surfaces.

Application Description

Application: Brush or roller only. Do not spray. STIR THOROUGHLY BEFORE USE. After surface preparation, the normal recommendation is to apply 1 or 2 coats of Dulux Trade Line Marking Paint. Do not use in cold, damp conditions. A single coat at standard thickness is normally touch dry after 30 minutes and resistant to vehicular traffic after 2 hours. Recoat after 1 hour.

Technical & Safety Documentation

Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Surfaces should be clean, sound and free from contaminants. Concrete - Power floated, granolithic and smooth surfaces should be roughened first to provide a good key for the paint. This can be done mechanically by abrading or blasting. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Tarmac - Due to the variability of asphalt, newly laid bitumen based surfaces (up to six months old) will need to be sealed with a thinned coat of Dulux Trade Vinyl Matt (add up to 1 part clean water to 5 parts paint), in order to prevent bleeding. It is recommended that a test patch be applied first when using newly laid bitumen. See Dulux Trade Datasheet 525 for full information before use available free on request by telephoning 0333 222 7070 or visiting duluxtrade.co.uk.
2. Cleaning

After use, remove as much paint as possible from brushes before cleaning with brush cleaner
3. Storing

Do not use or store in extremes of temperature

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator