Products
Products
Dulux Trade Diamond Satinwood

Dulux Trade Diamond Satinwood

Dulux Trade Diamond Satinwood is an advanced water-based, satin finish that provides superior durability and protects surfaces from scratches, stains, handprints and grease.

TWISTED BAMBOO 1

Change Colour

Size

1L 2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Tough, durable and non-yellowing
Suitable for high traffic areas
Stain and Grease Resistant
Water-based

Technical characteristics

Technical Information

Finish Satin
Coverage Up to 12m² per litre
Drying Time Dependent on the temperature and humidity
Recoatable 6 hours

Product Features

Fantastic Dulux Quality

Product Description

Dulux Trade Diamond Satinwood is a tough & durable satin finish that provides excellent protection from scratches, stains and grease.
The water-based formulation is designed to be used in high traffic areas, such as corridors, stairways and access areas, while having the added benefit of being quick drying with low odour. With professional aesthetics finish and non-yellowing water-based technology, it has never been so easy to switch to water based paints.

Application Description

Application : Apply by brush or roller. For best results use good quality synthetic (nylon polyester) brush or short pile synthetic/mohair roller designed for the application of water-based paints.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required.
Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
Most suitable for HVLP spray application using a minimum 3 stage unit. A typical setting is a 1.8mm spray tip (equivalent #4 fluid set) and a maximum of 20% thinning.
All recommendations are approximate as all settings will be affected by equipment/m

Technical & Safety Documentation

Download Adobe Reader

Colour Range

True Joy™ - Colour of the Year 2025, Weathershield Masonry Palette, Colour Futures 2020, Armstead Colour Guide, Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry

Tips & Advice

1. Preparing the Surfaces

To get the best results with Dulux Trade Diamond Satinwood, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 1006 for full information at duluxtrade.co.uk. or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints.
2. Cleaning

After use, remove as much paint as possible from equipment before cleaning with water.
3. Storing

Do not use or store in extremes of temperature and protect from frost.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator