Good to see you
Otherwise login by email.
Welcome to Dulux Trade
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account
![](https://msp.images.akzonobel.com/prd/dh/eukexp/packshots/76d8b9aff2118e30329048ddfda4edde.png)
Dulux Trade Diamond Satinwood
-
Tough, durable and non-yellowing
-
Suitable for high traffic areas
-
Stain and Grease Resistant
-
Water-based
-
Finish Satin
-
Coverage Up to 12m² per litre
-
Drying Time Dependent on the temperature and humidity
-
Recoatable 6 hours
Product Description
The water-based formulation is designed to be used in high traffic areas, such as corridors, stairways and access areas, while having the added benefit of being quick drying with low odour. With professional aesthetics finish and non-yellowing water-based technology, it has never been so easy to switch to water based paints.
Application Description
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required.
Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
Most suitable for HVLP spray application using a minimum 3 stage unit. A typical setting is a 1.8mm spray tip (equivalent #4 fluid set) and a maximum of 20% thinning.
All recommendations are approximate as all settings will be affected by equipment/m
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesTo get the best results with Dulux Trade Diamond Satinwood, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 1006 for full information at duluxtrade.co.uk. or by telephoning 0333 222 70 70. Before surface preparation, read the Health & Safety information about old lead paints.
-
2. CleaningAfter use, remove as much paint as possible from equipment before cleaning with water.
-
3. StoringDo not use or store in extremes of temperature and protect from frost.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
![](/content/dam/akzonobel-common/common-assets/paint-calculator-instructions.png)
![](https://msp.images.akzonobel.com/prd/dh/eukexp/packshots/76d8b9aff2118e30329048ddfda4edde.png)
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
![](https://msp.images.akzonobel.com/prd/dh/eukexp/packshots/76d8b9aff2118e30329048ddfda4edde.png)
Dulux Trade Diamond Satinwood
Save to My Workspace