Dulux Trade Diamond Satinwood

Dulux Trade Diamond Satinwood is a tough & durable satin finish that provides excellent protection from scratches, stains and grease.
The water-based formulation is designed to be used in high traffic areas, such as corridors, stairways and access areas, while having the added benefit of being quick drying with low odour. With professional aesthetics finish and non-yellowing water-based technology, it has never been so easy to switch to water based paints.

Application : Apply by brush or roller. For best results use good quality synthetic (nylon polyester) brush or short pile synthetic/mohair roller designed for the application of water-based paints.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required.
Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
Most suitable for HVLP spray application using a minimum 3 stage unit. A typical setting is a 1.8mm spray tip (equivalent #4 fluid set) and a maximum of 20% thinning.
All recommendations are approximate as all settings will be affected by equipment/m

True Joy™ - Colour of the Year 2025, Weathershield Masonry Palette, Colour Futures 2020, Armstead Colour Guide, Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Futures 2023, Colour Futures 2022, Colour Palette Fandeck, Dulux Trade Pro Colour Guide, Heritage, Dulux Trade Commercial Colour Guide, Colour Futures 2021, National Colour Wall, BS4800, RAL Classic, Weathershield Professional Colour Guide Masonry