Products
Products
Cuprinol Garden Shades Tinting Base

Cuprinol Garden Shades Tinting Base

Over 90 beautiful colours that can transform any garden – big or small

Olive Garden

Change Colour

Size

1L 2.5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

6 years protection
For use on all garden wood, terracotta, brick and stone
Beautiful matt colour enhances the grain of natural wood
Brush or spray

Technical Information

Finish Matt
Coverage Smooth planed wood -Brush 10-12m2 per litre ,Spray 4-5m2 per litre. Rough sawn wood - Brush 3-5m2 per litre ,Spray 2-3m2 per litre
Drying Time 1 hour
Composition Water-based

Product Features

6 years protection

Product Description

Add beautiful colours to your garden with Cuprinol Garden Shades, which has been specially developed to colour, protect and weatherproof sheds, fences, garden furniture and other garden wood for upto 6 years. Its special pigments ensure a richer colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta,brick and stone. Colours are easy to choose by combining nature's neutrals (greys, and muted greens, browns and blues) which are best suited for bigger items in the garden and nature's brights (yellows, pinks, purples and brigther greens and blues) ideal for smaller items in the garden. Just have a go!
Not to be applied on decking.

Application Description

Apply only in dry conditions, above 5 degrees Celsius and when bad weather is not forecast. Application by brush: Stir thoroughly before and during use. Brush on product evenly along the grain. Minimum 2 coats required.Application by spray: Stir thoroughly before pouring contents into a Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Technical & Safety Documentation

Download Adobe Reader

Colour Range

Cuprinol Garden Shades

Tips & Advice

1. Preparing the Surfaces

All surfaces should be clean and dry. If it has been painted previously coated, loose flaking wood should be stripped back to bare wood. Test a small area first for colour and adhesion.The final colour will vary depending on the surface and the number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent decay.
2. Cleaning

Remove product from brush with a cloth and then wash with water.
3. Storing

Do not store or use in extreme temperatures and protect from frost

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator