Products
Products
Armstead Trade Pliolite Based Masonry Paint

Armstead Trade Pliolite Based Masonry Paint

Armstead Trade Pliolite Based Masonry, BBA certified to provide up to 15 years protection and can be applied to exterior masonry at virtually any time of the year.

GOOSEWING

Change Colour

Size

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Up to 15 years protection
Resistant to moisture and alkali attack.
Can be applied down to -5°C
Solvent based

Technical Information

Finish Matt
Coverage Up to 8m2/litre depending upon surface texture
Drying Time 1-1.5 hours
Recoatable 12 hours
Thinning White Spirit 10
Composition Solvent-based

Product Features

Excellent coverage
Durable

Product Description

Armstead Trade Pliolite Based Masonry Paint is a professional quality, durable, solvent-based smooth masonry paint. Based on Pliolite® Acrylated Rubber resins, it provides a long lasting coating with good adhesion and resistance to moisture and alkali attack. It is easy to apply and provides good coverage. Armstead Trade Pliolite® Based Masonry is much more tolerant to showery or cold weather during application than traditional water-based exterior masonry paints, and can be applied to exterior masonry surfaces at virtually any time of the year. It is also BBA certified to provide up to 15 year protection.

Application Description

STIR THOROUGHLY BEFORE USE. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite® Based Masonry. Touch dry 1-1.5 hours at 20ºC/65%RH. Recoat: 12 hours @ 20°C/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.

Technical & Safety Documentation

Application- Brush or roller only. For Health and Safety reasons related to all solvent based paints, spray application is not recommended.

Download Adobe Reader

Colour Range

Armstead Colour Guide, BS4800, RAL Classic

Tips & Advice

1. Preparing the Surfaces

To get the best results with Armstead Trade Pliolite® Based Masonry, make sure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Armstead Trade Datasheet AM304 for full information before use, available free on request by telephoning 0333 222 7070 or visiting armsteadtrade.co.uk. Before surface preparation, read the adjacent information about old lead paints.
2. Cleaning

After use, remove as much paint as possible from equipment before cleaning with brush cleaner
3. Storing

Do not use or store in extremes of temperature.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator